Skip to main content Skip to search Skip to main navigation

Epson IMU M-G370PDT UART/SPI

Epson IMU M-G370PDT UART/SPI

M-G370Lowest noiseUART · SPI

The low-noise IMU for gimbals and stabilized optics: 0.03 °/√h angular random walk in a 24 × 24 × 10 mm, 10 g module.

Half the angle noise of the M-G370PDG with the same 0.8 °/h bias instability. The ±200 °/s range concentrates resolution where stabilization happens.

0.03°/√hAngular random walk
0.8°/hGyro bias instability
±200°/sGyro range
10g24 × 24 × 10 mm
16mAat 3.3 V
Applications

Where the M-G370PDT fits best

Camera and EO/IR gimbals

Sharp images at long focal lengths need a calm rate signal.

Antenna and SATCOM pointing

Stable pointing on moving vehicles and vessels.

Mapping payloads

Attitude for LiDAR and photogrammetry where angle noise blurs the point cloud.

Precision navigation

Low noise and low drift for ground and aerial vehicles.

Performance

Allan deviation and key specifications

On the left of the curve the M-G370PDT is clearly quieter than the PDG models. At long averaging times it meets the M-G370PDG.

Allan deviation of the Epson M-G370PDT compared with M-G366PDG and M-G370PDG
Modelled from the typical data sheet values for angular random walk (ARW) and bias instability. The full data sheet contains Epson's measured curves.
ParameterTypical value
Angular random walk0.03 °/√h
Gyro bias instability0.8 °/h
Gyro noise density2.52 (°/h)/√Hz
Gyro range±200 °/s
Accelerometer range±8 g / ±16 g
Accelerometer bias instability24 µg
Output rateup to 2000 Sps
InterfaceUART or SPI
Supply3.3 V, 16 mA typ.
Operating temperature−40 … +85 °C
Size, weight24 × 24 × 10 mm, 10 g

Typical values from the Epson data sheet. The full data sheet is available on request.

Family

Same footprint as the PDG series

Develop with one board layout and choose the sensor by application.

M-G366PDG

Balanced

Bias instability1.2 °/h
ARW0.08 °/√h
Gyro range±450 °/s

M-G370PDG

Lowest drift

Bias instability0.8 °/h
ARW0.06 °/√h
Gyro range±450 °/s

M-G370PDT

Lowest noise

Bias instability0.8 °/h
ARW0.03 °/√h
Gyro range±200 °/s
FAQ

Frequently asked questions

M-G370PDT or M-G370PDG?

Both have 0.8 °/h bias instability. Choose the PDT when angle noise limits your image or pointing quality and ±200 °/s is enough. For vehicles with faster turns and for navigation, the M-G370PDG with ±450 °/s is usually the better fit.

Does it fit the same board as the PDG models?

Yes. It shares the 24 × 24 × 10 mm footprint and connector with the PDG series.

Can it output delta angle and delta velocity?

Yes, in addition to rate and acceleration. It also has an external trigger and counter reset input for synchronization.

Can I test it before ordering?

Yes. For qualified projects we lend evaluation kits free of charge.

Test it in your own system.For qualified projects we lend evaluation kits free of charge. Pricing and availability on request.

Specifications "Epson IMU M-G370PDT UART/SPI"
Angular Random Walk (ARW): 0.03 °/√h
Bias Instability (Accelerometer): 24 μG
Bias Instability (Gyro): 0.8 °/h
Country of Origin: Japan
Dimension: 24x24x10 mm3
Interface (Protocol): SPI , UART
Manufacturer: Epson
Operating Temperature (max): +85°C
Operating Temperature (min): -40°C
Range (Accelerometer): +/- 8G, +/- 16G
Range (Gyro): +/-200 °/s
Series/ Type: M-G370
Supply Voltage, Vcc: 3.3 V
Velocity Random Walk (VRW): 0.020 (m/s)/√h
Datasheets
Briefsheet

Oops! Your browser doesn't support PDFs!

Download "Briefsheet" (329.33 KB)